Best Miter Saw: WEN MM1011 15 Amp 10-inch Single Bevel

For most hobbyist woodworkers, a miter saw is an essential component of their home workshop. Miter saws allow users to create smooth, accurate miters and crosscuts for a wide variety of projects, and their versatility and affordability make them an excellent value.

Miter saws are prized by carpenters for their accuracy and high-quality cuts, and they can also save you considerable time on large projects by quickly completing wide cuts in large pieces of material. They are typically used to make four basic types of cuts:

  • Crosscuts: These simple, straight cuts are against the grain of the wood and can be accomplished by most saw types, including miter saws.
  • Miter cuts: These angled cuts are made at the ends of boards or pieces of trim, such as at the corners of door frames.
  • Beveled cuts: Beveled cuts are angle cuts with an undercut and are often used with baseboard and other types of trim.
  • Compound cuts: These complex cuts include both bevels and miters and are commonly used to create flawless corner joints for crown molding and other finely-detailed pieces.

When choosing a miter saw, you’ll need to consider what types of tasks you’ll be using it for, since these saws come in a variety of increasingly complex designs.

wen mm1011
  • Basic: The least expensive and easiest to operate, basic miter saws can perform miters and crosscuts, but do not tilt to create beveled cuts.
  • Single Compound: Simple compound miter saws can make crosscuts, miters and tilt one direction (usually to the left) to make bevel cuts, which means you’ll have to flip the board over to make a matching bevel on the opposite side.
  • Dual Compound: These saws have the same functionality as single compound miter saws, but with the added convenience of two-direction tilt, allowing users to efficiently create consistent bevels without moving the material.
  • Compound Sliding: The extended rails built into this type of single compound miter saw allow users to cut longer pieces of material.
  • Dual Compound Sliding: This king of all miter saws can perform virtually any type of crosscut, miter cut and two-direction bevel cut on long and short boards.

What to Look for in a Miter Saw

As always, the best miter saw for your needs will vary based on a variety of individual factors, including your experience level, the types of projects you plan to use it for and even where you expect to use it. As you compare different saw models, the most important considerations include the factors below.


Our Pick: WEN MM1011 15-Amp 10-inch Single-Bevel Miter Saw

With its muscular 15-Amp motor and 10-inch carbide-tipped blade, the WEN MM1011 Single-Bevel Miter Saw is a reliable workhorse capable of cutting through both hard and soft woods with ease and precision. The 40-tooth blade spins at 4,500 RPM and can tackle boards up to 12 inches wide and 3.5 inches tall.

Nine positive miter stops (2° at 15°, 2° at 22.5°, 2° at 30°, 2° at 45° and 1° at 0°) allow users to quickly create common angles, while the miter lock enables the saw to lock at any angle between those stops for more uniquely-angled cuts.

wen mm1011

Adding to its versatility, the saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left, and it includes a 7.5-inch crown molding nested capacity and a 6.75-inch base board vertical capacity.

An onboard class II laser guide creates easy-to-see lines of cut to ensure accuracy, and a dust port adapter allows you to connect to the included dust bag or your preferred collection device. Two table extensions and a clamp assembly round out this well-equipped package, which is backed by WEN’s two-year warranty and industry-leading customer support team.

NOTE: For more information about what the best type of cutting board oil can do for your newly built butting boards, check out our in-depth dive: 5 Picks: The Best Cutting Board Oil For The Perfect Boards


wen mm1011

WEN MM1011: Specifications

  • Weight: 38 pounds
  • Blade size: 10 inches
  • Blade speed: 4,500 RPM
  • Arbor: 5/8-inch
  • Maximum cutting width: 12 inches
  • Maximum cutting thickness: 3.5 inches
  • Miter range: 45 degrees in either direction
  • Bevel range: Up to 45 degrees to the left
  • Warranty: 2 years

wen mm1011

WEN MM1011: Features

  • Powerful 15-Amp motor tackles hard and soft woods with ease
  • 10-inch, 40-tooth carbide-tipped blade spins at 4,500 RPM for smooth, clean cuts
  • Onboard class II laser guide provides clear visual for line of cut
  • Features 9 positive miter stops, but can be adjusted to lock between stops to create unique angles
  • Accessory package includes two table extensions, clamp assembly, dust port adapter and dust bag

Pros and Cons of the WEN MM1011

As with any Miter Saw, there are going to be advantages and disadvantages when compared to other product options. This option is no exception. We would be remiss if we didn’t cover this hand planer from all angles. Below are some of the pros and cons that we have discovered with the WEN MM1011 Miter Saw.

Pros of the WEN MM1011

  • Onboard laser guide establishes clear line of cut to ensure accuracy and consistency
  • Easy for all experience levels to assemble and use
  • Lightweight yet sturdy construction
  • Helpful customer support resources and two-year warranty
  • Affordably priced for a solid value

Cons of the WEN MM1011

  • Electric cord can get in the way and limit options for field use
  • Relatively low blade tooth count can make cuts a bit messy
  • Dust bag could be improved to contain debris more effectively 

Our Verdict on the WEN MM1011 15-Amp 10-inch Single Bevel Miter Saw

The WEN MM1011 15-Amp 10-inch Single Bevel Miter Saw is a reliable and versatile tool that will enhance the quality of your woodworking projects without breaking the bank. Its mighty motor, high-quality carbide-tipped blade and durable components deliver impressive performance and consistent cuts, while convenient features like the dust port adapter and table extensions make it a pleasure to use. The peace of mind provided by WEN’s two-year warranty and vaunted customer service is simply icing on the cake.

Leave a Comment